 |
 |
|
REQUIREMENTS:
Application Software:
LabVIEW Base Development System 8.2.1
Driver Software:
NI-DAQmx 8.7.1
Hardware Family:
High-Speed Digital I/O
Add-on Software:
LabVIEW Advanced Signal Processing Toolset 8.6
Product Category:
LabVIEW, NI TestStand
Development Topic:
Digital I/O
Industry:
ATE/Instrumentation, Consumer Goods, Electronics
Application Type:
Angular Velocity
Technology:
Embedded Devices
This VI shows how to use the NI 653x high speed digital I/O boards to regenerate a continuous pattern by preloading the entire pattern onto the device's memory and looping through the pattern. This step removes the board's reliance on PCI bus bandwidth for data transfer and can be used to free PCI bus bandwidth for use by other devices.
Front Panel Steps:
1. Select the lines to for output
2. Select the sampling rate
4. Run the VI
Block Diagram:
Average User Rating
(0 ratings)
There are no comments on this document
Legal
This content (includes attachments) has been made available by community members, whom are solely responsible for such content. National Instruments does not support this content, and does not guarantee its quality in any way. NATIONAL INSTRUMENTS MAKES NO WARRANTIES, EXPRESS, STATUTORY OR IMPLIED, WITH RESPECT TO THIS CONTENT, INCLUDING WITHOUT LIMITATION ANY WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, TITLE, NON-INFRINGEMENT OF INTELLECTUAL PROPERTY, OR ANY OTHER WARRANTIES THAT MAY ARISE FROM USAGE OF TRADE OR COURSE OF DEALING. For details regarding support of such content, please contact the author. For further legal information, please visit http://ni.com/legal/termsofuse/unitedstates/us/.
My Profile | RSS | Privacy | Legal | Contact NI © 2008 National Instruments Corporation. All rights reserved. |
