 |
 |
|
FPGA-Based quadrature encoder simulation
Created on: Oct 20, 2008 3:05 PM by Javier_Gutierrez - Last Modified: Dec 2, 2008 3:26 PM by Doug Shepard
REQUIREMENTS:
Application Software:
LabVIEW Professional Development System 8.6
Driver Software:
NI-DAQmx 8.5
Hardware Family:
CompactRIO
Add-on Software:
LabVIEW FPGA Module 8.6
Product Category:
LabVIEW
Development Topic:
Dynamic Test
Industry:
Electronics
Application Type:
Control
Technology:
FPGA
This VI Simulates the output of a 512 pulses/rev quadrature encoder
To simulate encoder with different pulses per revolution change the "encoder constant" (see diagram block) that is calculated by encoder constant=(num of pulses per revolution*2^32)/(40 10^6*2pi)
Average User Rating
(0 ratings)
There are no comments on this document
Legal
This content (includes attachments) has been made available by community members, whom are solely responsible for such content. National Instruments does not support this content, and does not guarantee its quality in any way. NATIONAL INSTRUMENTS MAKES NO WARRANTIES, EXPRESS, STATUTORY OR IMPLIED, WITH RESPECT TO THIS CONTENT, INCLUDING WITHOUT LIMITATION ANY WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, TITLE, NON-INFRINGEMENT OF INTELLECTUAL PROPERTY, OR ANY OTHER WARRANTIES THAT MAY ARISE FROM USAGE OF TRADE OR COURSE OF DEALING. For details regarding support of such content, please contact the author. For further legal information, please visit http://ni.com/legal/termsofuse/unitedstates/us/.
My Profile | RSS | Privacy | Legal | Contact NI © 2008 National Instruments Corporation. All rights reserved. |
