 |
 |
|
REQUIREMENTS:
Application Software:
LabVIEW Base Development System 8.2.1
Driver Software:
NI-DAQmx 3.0.1
Hardware Family:
Multifunction DAQ (MIO)
Add-on Software:
LabVIEW FPGA Module 8.6
Product Category:
GPIB
Development Topic:
Digital I/O
Industry:
Research
Application Type:
Control
Technology:
Wireless
This piece of code uses the onboard counter of an M-Series device to provide a clock for continuous digital output. The only limitation is that you can only continuously generate from Port 0 of a M-Series MultifunctionDAQ. If you need the use of additional digital lines you should look at National Instruments DIgital I/O boards, such as the PCIe-6537.
Average User Rating
(0 ratings)
There are no comments on this document
Legal
This content (includes attachments) has been made available by community members, whom are solely responsible for such content. National Instruments does not support this content, and does not guarantee its quality in any way. NATIONAL INSTRUMENTS MAKES NO WARRANTIES, EXPRESS, STATUTORY OR IMPLIED, WITH RESPECT TO THIS CONTENT, INCLUDING WITHOUT LIMITATION ANY WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, TITLE, NON-INFRINGEMENT OF INTELLECTUAL PROPERTY, OR ANY OTHER WARRANTIES THAT MAY ARISE FROM USAGE OF TRADE OR COURSE OF DEALING. For details regarding support of such content, please contact the author. For further legal information, please visit http://ni.com/legal/termsofuse/unitedstates/us/.
My Profile | RSS | Privacy | Legal | Contact NI © 2008 National Instruments Corporation. All rights reserved. |
