Home Community Example Programs Example Code Document

Example Code

cancel
Turn on suggestions
Showing results for 
Search instead for 
Did you mean: 
ASK A QUESTION

Integrate an Acceleration Waveform Into Velocity and Position Waveforms using LabVIEW

by: Active Participant
‎04-09-2009 10:26 AM
Last Edited by: Member Example_Scrubber_Guangwei ‎08-04-2017 03:22 AM

Products and Environment

This section reflects the products and operating system used to create the example.

To download NI software, including the products shown below, visit ni.com/downloads.

    Software

  • LabVIEW

Code and Documents

Attachment

Download All

Overview
This VI uses the time domain express VI included in LabVIEW to create a velocity and position waveform from an acceleration waveform.


Description
This VI uses a DAQ assistant to generate a sine wave with simulated hardware. Unless you also have a simulated Dev3, the DAQ Assistant will need to be modified or replaced with your waveform.


Requirements

Software:

  1. LabVIEW 2012(or compatible)


Steps to Implement or Execute Code

  1. Unzip the attached folder to your computer
  2. Open the VI
  3. Run the program

 

Additional Information or References
VI Block Diagram

 1.png

 **This document has been updated to meet the current required format for the NI Code Exchange.**

Stephen B

Example code from the Example Code Exchange in the NI Community is licensed with the MIT license.

0 Kudos