 |
 |
|
Functional Description
This example allows the user to get an image output that is the weighted sum of two chosen images. A slider control that goes from 0 to 1 determines the weightage of both images in the sum. For example, in the case of Images A and B, a slide value of 0 would result in a sum of 0% A + 100% B. When the slide value is 1, sum = 100% A + 0% B.
Caveats and Additional Notes
LabVIEW 8.2, Vision Development Module 8.6
Average User Rating
(0 ratings)
Legal
This content (includes attachments) has been made available by community members, whom are solely responsible for such content. National Instruments does not support this content, and does not guarantee its quality in any way. NATIONAL INSTRUMENTS MAKES NO WARRANTIES, EXPRESS, STATUTORY OR IMPLIED, WITH RESPECT TO THIS CONTENT, INCLUDING WITHOUT LIMITATION ANY WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, TITLE, NON-INFRINGEMENT OF INTELLECTUAL PROPERTY, OR ANY OTHER WARRANTIES THAT MAY ARISE FROM USAGE OF TRADE OR COURSE OF DEALING. For details regarding support of such content, please contact the author. For further legal information, please visit http://ni.com/legal/termsofuse/unitedstates/us/.
My Profile | RSS | Privacy | Legal | Contact NI © 2010 National Instruments Corporation. All rights reserved. |
Thanks for posting, could you please add screenshots of your block diagram and front panel!
Hunter