Skip navigation

Community

Currently Being Moderated

Set "Analog Output" (AO) voltages on NI myDAQ

VERSION 1 
Created on: Aug 23, 2010 2:40 PM by edoering - Last Modified:  Aug 23, 2010 3:59 PM by edoering

Summary: Set the pair of NI myDAQ analog output (AO) channel voltages to desired DC values. Zero the outputs when the application exits (default behavior) or maintain the most-recent values, if needed.

 

NOTE: This VI expects myDAQ to be attached as device "Dev1". If another device number is necessary or if multiple myDAQ devices are used, double-click each of the two instances of "DAQ Assistant" Express VI, select "VoltageOut_0" under "Channel Settings", right-click and choose "Change Physical Channel", and then choose a suitable analog output channel; repeat for "VoltageOut_1".

 

set ao voltage.png set ao voltage.png

Attachments:
Comments (0)