From Friday, April 19th (11:00 PM CDT) through Saturday, April 20th (2:00 PM CDT), 2024, ni.com will undergo system upgrades that may result in temporary service interruption.
We appreciate your patience as we improve our online experience.
Example Code
Products and Environment
This section reflects the products and operating system used to create the example.To download NI software, including the products shown below, visit ni.com/downloads.
- Data Acquisition (DAQ)
Hardware
- LabVIEW
Software
- NI DAQmx
Driver
Code and Documents
Attachment
Overview
This VI will give the user ability to pan or zoom on one graph and have the same action be applied across all other graphs.
Description:
This example would show you how to manipulate a graph of one of the front panel's object that would be applied the same into any other graphs using the property node.
Steps to implement or execute code
To implement this example:
- Run the VI
- Modify the desired action to be applied on the Waveform Graph 1
- Observe that the rest of the graphs change
To execute this example:
- Install the required software.
- Connect the DAQ hardware that supports the Analog Input features
- Confirm the connection with the MAX with TestPanel
- Open the VI and refer the Implement Steps
Requirements
Software
LabVIEW 2012 or compatible
NI-DAQmx 16.0 or compatible
Hardware
cDAQ with C series Analog Input Module
**This document has been updated to meet the current required format for the NI Code Exchange.**
Example code from the Example Code Exchange in the NI Community is licensed with the MIT license.
