Example Code

How to Ping another computer from within LabVIEW

Products and Environment

This section reflects the products and operating system used to create the example.

To download NI software, including the products shown below, visit ni.com/downloads.

    Software

  • LabVIEW

Code and Documents

Attachment

Download All

Overview
To Ping the Desired Website using the LabVIEW

Description:
Here is how to ping another computer from within LabVIEW. This can be very useful when needing to check the connectivity of a computer on the network.

Instructions:
To implement this example:

  1. Run the VI
  2. (Optional) Change the desired website to ping by accessing the block diagram


To execute this example:

  1. Install the required software.
  2. Open the VI and refer the Implement Steps


Requirements
Software
LabVIEW 2012 or compatible

Hardware
-

fp.PNGbd.PNG

**This document has been updated to meet the current required format for the NI Code Exchange.**

Joe Daily
National Instruments
Applications Engineer

may the G be with you ....

Example code from the Example Code Exchange in the NI Community is licensed with the MIT license.