Example Code

Bipolar Waveform Generator

Products and Environment

This section reflects the products and operating system used to create the example.

To download NI software, including the products shown below, visit ni.com/downloads.

    Software

  • LabVIEW

Code and Documents

Attachment

Download All

Overview
To demonstrate how to generate bipolar waveform

Description:
This LabVIEW VI shows the ease at which Waveform manipulations can be carried out using the Waveform and simple numeric functions.
By creating two square waveform, one the negative of the other, putting one 180 degrees out of phase and then simply adding them together means we can make some pretty useful/different waveform.


Steps to implement or execute code
To implement this example:

  1. Define the Amplitude, frequency and the duty cycle.
  2. Run the VI
  3. (Optional) Turn on the Highlight Execution to see the flow of the VI


To execute this example:

  1. Open the VI and refer the Implement Steps


Requirements
Software
LabVIEW 2012 or compatible2017-11-01_10-11-12.jpg2017-11-01_10-11-23.jpg

Hardware
-

 

**This document has been updated to meet the current required format for the NI Code Exchange.**

Liam A.
National Instruments
Applications Engineer

Example code from the Example Code Exchange in the NI Community is licensed with the MIT license.