To download NI software, including the products shown below, visit ni.com/downloads.
Overview
This example shows how to programmatically change the IP address of a remote system。
Description
This code shows how to programmatically change the IP address of a remote system.
To implement this function, firstly get FTP file where host is the original IP address and remote path is the file ni-rt.ini that needs to be changed and open the .ini file. Then read the whole file, looking for "IP address =" in the file and looking for "S" (which is the start of the next item in the file i.e Subnet..). Everything in between these is the IP Address that we are interested in. Next add the new IP address into the file, replace /open the file with the same path and wirte the new content. Lastly copy .ini file on local machine and reboot the machine for changes to take effect.
Requirements
Steps to Implement or Execute Code
Additional Information or References
VI Snippet
**This document has been updated to meet the current required format for the NI Code Exchange.**
Example code from the Example Code Exchange in the NI Community is licensed with the MIT license.