MyRio vs. 10DOF

[SimonFritz]

Hey,

i just got my MyRio a few Days ago and i now wanted to work with a 10DOF Sensor.

10DOF Sensor Components:

- ADXL345      accelorator

- BMP085       pressure

- L3G4200D    gyro

- HMC5883L   compass

I tryed to get the I2C connection work. My question is, how can i tell the Slave device the adress of the register? The I2C Vi just have the inputs "slave device" and "Bytes to write" but no "registr adress".

Sorry for my english

Simon

[harunturan]

hi Simon.

i have same problem. so i have 10 dof IMU and myrio 1900. i saw your question on discussion forums. Do you connect sensor to myrio with i2c ?  Can you read data from 10 dof sensor?

Thanks.

[SimonFritz]

Hi harunturan,

sadly no.... the project is on ice since january so i didn't tried it again.         But if you'll find a solution for it i would be glad if you let me know!! 😃

[harunturan]

okey simon.

[Sherif2020]

from the pallette my rio...go to low level...i2c...write....then add your register address to bytes to write....