03-24-2015 09:11 AM
03-24-2015 09:17 AM
Hi/Bonjour Yohann,
In addition to Jiri's Answer, can you let us know what are the reasons behind playing with Custom Device source code?
Regards
Vincent
03-24-2015 09:32 AM
Thanks a lot Jiri,
(I guess you don't remember me, but i was in the training you provided in Toulouse in april 2013)
The reason why i want to access source code is not really related with Scan Engin & Ethercat. In fact i am looking for examples of easy and efficient ways to deal with custom devices versioning. I have done several searchs in NI website but didn't find many informations about this.
03-24-2015 10:03 AM
Hi yledieu, it is hard to guess based on nick name 🙂
Great to hear, that you are working with NI VeriStand.
Yep, Scan Engine CD is nice example.
Automotive Engine simulation is also nice addon to check:
https://github.com/NIVeriStandAdd-Ons/Engine-Simulation-Toolkit-Custom-Device
~Jiri
CLA, CTA, CLED
03-27-2015 03:26 PM
Hi,
I'm having a problem with setting up a new cRIO. My cRIO is a 9074. I have a couple of modules and a simulation model I compiled using matlab. I have setup a brand new project and I have only added the scan engine and the chasis without any modules. I have not added my simulation model. When I try to deply I get the follwoing error:
The VeriStand Gateway encountered an error while deploying the System Definition file.
Details:
Error 1003 occurred at Project Window.lvlib:Project Window.vi >> Project Window.lvlib:Command Loop.vi >> NI_VS Workspace ExecutionAPI.lvlib:NI VeriStand - Connect to System.vi
Possible reason(s):
LabVIEW: The VI is not executable. This error may occur because the VI is either broken or contains a subVI that LabVIEW cannot locate. Select File>>Open to open the VI and verify that you can run it.
=========================
NI VeriStand: Open VI Reference in Custom Devices Storage.lvlib:Open Device Reference (HW Interface).vi->Custom Devices Storage.lvlib:Initialize Device (HW Interface).vi->NI VeriStand Engine.lvlib:Initialize Inline Custom Devices.vi->NI VeriStand Engine.lvlib:VeriStand Engine State Machine.vi->NI VeriStand Engine.lvlib:VeriStand Engine.vi->NI VeriStand Engine.lvlib:VeriStand Engine Wrapper (RT).vi<APPEND>
/c/ni-rt/NIVeriStand/Custom Devices/Scan Engine/Scan Engine RT Driver.vi
Do you have any sugestions?
Thanks!
03-27-2015 03:33 PM
Hello ebusquets,
Please check that you have the proper software installed on the real-time target.
Best Regards,
Lynn
03-27-2015 03:47 PM
Hi, Thanks for the reply,
I believe I have the required software installed. I've attached a screenshot of the NIMAX software. Please let me know if I'm missing something. (I am not using an ethercat)
Thanks
03-27-2015 04:23 PM
It appears as though you are missing the NI-RIO IO Scan driver. Please install this item to the target and redeploy.
03-27-2015 05:03 PM
Thanks a lot. That fixed it.
03-31-2015 07:33 AM
Hi
We can find Scan Engine &Ether CAT custom devices in two platforms NI and Github. Which is the compatible/correct one for 2014 version of NI veristand. Simlalry, I need Engine Simulation ( not toolkit, the old version ) custom devices for 2014 version. Please post me the links for that.
ksc