FIRST Robotics Competition Discussions

cancel
Showing results for 
Search instead for 
Did you mean: 

Where is the 2014 software

For some reason the software pages say not found. Any ideas where I can get 2014 FRC software and the DS/Update

0 Kudos
Message 1 of 8
(7,174 Views)

You should be able to get everything from the links in this document:https://decibel.ni.com/content/docs/DOC-34731

Let me know if you have issues with those.

Kevin Fort
Principal Software Engineer
NI
0 Kudos
Message 2 of 8
(4,114 Views)

When this was originally posted, the link in that document was dead for me. It's working now.

0 Kudos
Message 3 of 8
(4,114 Views)


When I try to download the FRC 2014 software from https://decibel.ni.com/content/docs/DOC-34731 the downloader runs OK, but after downloading 925MB out of the ~5GB it gets stuck everytime, and retries endlessly - not proceeding beyond 925MB.

I tried to download and run again the downloader EXE, but with the same results.

Any help on downloading will be appreciated.

0 Kudos
Message 4 of 8
(4,114 Views)

I tried downloading, and while I did not let it go to completion, it did download more then 925mb. Are you running out of disk space? Have you tried another computer and/or internet connection?

0 Kudos
Message 5 of 8
(4,114 Views)

Sorry about the necro-post, but it looks like the 2015 page has overtaken all of the 2014 versions. That normally would be fine, but the update suit (The one with the driver station and the cRio utilities) has not been released yet.

I'm trying to re-image an old cRio for use in our programming department and need the 2014 utitlies/driver station. Where can I find those? Maybe download archives or something?

Thank you in advance!

0 Kudos
Message 6 of 8
(4,114 Views)

@alexkafer

I am in the same boat as you awaiting an answer on where it can be found, because after over an hour of looking, I still haven't found a working download link. Can't wait for an answer!

0 Kudos
Message 7 of 8
(4,114 Views)

The ni.com/frc download page has now been updated with the links for the 2015 software. You can find the 2014 software at these links:

2014 Update Suite:

http://download.ni.com/support/softlib/first/frc/FileAttachments/FRC2014UpdateSuite6.00.zip

2014 NI Software for FRC:

http://download.ni.com/support/softlib/labview/labview_frc/NI_FRC2014.zip

Zach P.

Staff Software Engineer | LabVIEW R&D | National Instruments
Message 8 of 8
(4,114 Views)