LabVIEW Interface for Arduino Discussions

cancel
Showing results for 
Search instead for 
Did you mean: 

Using LIFA pallets in LINX?

Solved!
Go to solution

Hello, my name is Jesús Galindo,

Can I use LIFA pallets in LINX? It's because I am trying to set some PWM write and I don't know how.

Regards!

0 Kudos
Message 1 of 7
(4,011 Views)
Solution
Accepted by topic author jesgalindo

No you can not mix LIFA and LINX. They are 2 seperate toolkits and deploy different software to the arduino or device. My suggestion is to use LINX. There is a subvi in the toolkit called /peripherals/PWM/Set Duty Cycle that could be used for this purpose.

Now Using LabVIEW 2019SP1 and TestStand 2019
0 Kudos
Message 2 of 7
(3,148 Views)

No you can not mix LIFA and LINX. They are 2 seperate toolkits and deploy different software to the arduino or device. My suggestion is to use LINX. There is a subvi in the toolkit called /peripherals/PWM/Set Duty Cycle that could be used for this purpose.

Now Using LabVIEW 2019SP1 and TestStand 2019
0 Kudos
Message 3 of 7
(3,148 Views)

No you can't mix LIFA and LINX as they are 2 different toolkits. I would suggest using LINX as LIFA won't be updated. There is PWM vi in LINX.

Now Using LabVIEW 2019SP1 and TestStand 2019
0 Kudos
Message 4 of 7
(3,148 Views)

And, do you know a place where I can get some tutorials?

0 Kudos
Message 5 of 7
(3,148 Views)

Visit the official LINX website (http://www.labviewmakerhub.com/linx).  You can get LINX using VIPM (you don't need to download it because VIPM will download and install it for you).

Once you have it installed, you can go into the example finder and find the LINX examples.

0 Kudos
Message 6 of 7
(3,148 Views)

Thank You Nathan,

I really apreciate your time to respond. I'll do it right away.

0 Kudos
Message 7 of 7
(3,148 Views)