Diadem measurements as output for actuators

[solenoid_valve]

Hello together,

I am working right now with DIAdem, serving as my data acquisition system for the test rig. Is it possible to use certain measured values, giving me a live output signal that I can work with?

I want to use these signals for controling actuators, that are part of my test rig.

Thank you for your help!

[TSE_Expert]

Hi Solenoid_Valve,

it is in principle possible by using the "driver outputs" functions in the DAC Bundle of Diadem.

For example by applying the NI DAQmx Driver, and optionally the read/write buffer functions.

http://www.ni.com/pdf/manuals/374987d.pdf

Best Regards,

NI TSE