To download NI software, including the products shown below, visit ni.com/downloads.
Overview
This VI is a template that allows you to control LEDs and at the same time drive a motor.
Description
The first loop in the VI controls the flashing of the LEDs. There is a flat sequence in the first loop with three frames. The first frame writes on the LEDs; the second frame waits and the third frame writes the next pattern of the LED. The Wait time(ms) in the first loop is used to adjust the loop time according to the speed of the motor.
The second loop simply outputs a constant voltage to the motor.
This VI only switches between 2 different states and can hence not display whole letter and must be expanded to display a whole letter.
Requirements
Steps to Implement or Execute Code
Additional Information or References
VI Snippet
**This document has been updated to meet the current required format for the NI Code Exchange.**
Example code from the Example Code Exchange in the NI Community is licensed with the MIT license.