07-07-2010 01:10 PM
I'm using a 5105 to capture 4 analog signals and 4 control signals that are at different levels. Is it possible to configure the 5105 for different vertical ranges on each of the 8 channels?
Thanks
07-08-2010 09:35 AM - edited 07-08-2010 09:35 AM
Howdy Creed!
This KnowledgeBase article explains how to configure the vertical range per channel of your digitizer. Hope that helps!
Regards,
07-08-2010 08:14 PM
Thanks. I think that's what I was looking for except the figures are no longer available so
I can't be sure. The text sounds like what I was looking for. An NI engineer found the
following:
I would recommend taking a look at the two examples that I have included.
1. The first example shows how you can set the Vertical Range independently
for different channels by using an NI-SCOPE Property Node.
http://zone.ni.com/devzone/cda/epd/p/id/2085
2 . The second example shows how you can set the Vertical Range by using
two different niScope Configure Vertical.vi with a different channel name
going to each.
http://zone.ni.com/devzone/cda/epd/p/id/4017
thanks for your help.
Regards,