ni max实时机IP地址更改不了

[asdadsadas]

ni max实时机IP地址更改不了，改完之后重启还是原来的地址。

[ZYOng]

---

@asdadsadas wrote:

The IP address of the ni max real-time machine cannot be changed, and it will still be the original address after restarting.

---

Check the following place if Reset IP Address is enabled.

1. NI MAX

2. BIOS

3. DIP Switch on the controller

[asdadsadas]

Can you be more specific?I can't find it. Where is the exact location

Thank you

[ZYOng · Accepted solution]

I think I have remembered it wrongly. There is no Reset IP Address option in NI MAX.

For BIOS, 

1. During boot press the <Delete> key to enter BIOS setup
2. Navigate to the LabVIEW RT section of the BIOS setup
3. Highlight Reset IP Address, press the <Enter> key, and select No from the sub-menu
4. Exit BIOS saving change

Reference: Cannot Connect to PXI Real-Time Target on a Network

For the hardware switch, there is a DIP switch on all NI PXI controllers. For example for PXIe-8840, see page 32 of PXIe-8840 User Manual