05-15-2016 05:21 AM
Hi, I have two allied vision Mako gige cameras.
http://www.stemmer-imaging.co.uk/en/products/av-mako-g-030b-poe/
These have a hardware triggering ability, and two cables for this purpose:
http://www.stemmer-imaging.co.uk/en/products/cable-misc-full-mako-op-5m/
I neeed to run these at 120 fps, in perfect sync. I cannot find anywhere, info on what exactly I should use for this. What board / hardware do I need to send the sync signal? Will something like this work?
I need to embed whatever it is inside the mount with the cameras, so small and low power draw would be ideal. Any tips/ workflow ideas would be greatly appreciated.
Thank you!
05-15-2016 04:30 PM
05-15-2016 10:03 PM
Most cameras can send or receive a pulse every time they capture an image. You can connect a cable between the cameras and configure one to sent the pulse and the other to trigger off the pulse.
Bruce
05-16-2016 10:20 AM