02-14-2012 12:57 PM - edited 02-14-2012 01:00 PM
Hi everyone,
I have a PXI-1042 chassis that I use with the PXI-5600 Downconverter and PXI-5620 digitizer. Also, I have another chassis PXIe-1075 that I also use with the PXI-5600 Downconverter and one PXI-5142 digitizer.
These modules that I describe are ALL Standard CompactPCI peripheral products, that means, not PXI express. Obviously, I use them on the hybrid slots of the PXI Express 1075 chassis.
It turns out that my PXI-1042 power source had a problem, so I ordered a new chassis, equal to the other one I have PXIe-1075. When I tried to install the modules PXI-5600 Downconverter and PXI-5620 digitizer into the new chassis and I had a bad surprise:
They are physically incompatible!!! How is that possible? They are the same I use in the other PXIe-1075 chassis, the only the difference is the digitizer but is also NOT EXPRESS.
So, I removed the PXI-5600 Downconverter and PXI-5142 digitizer, from the first PXIe-1075 and compared with the others that where from the dead chassis, these are the photos:
The above pictures are from the PXI-5600 Downconverter and PXI-5142 digitizer that I have in my PXIe-1075 chassis.
The pictures below are from the modules that I removed from the dead PXI-1042 chassis, showing they are different.
Now I have a new $ 7,000 chassis that I cant use with my modules because of that. What am I suppose to do? Is it possible to remove that portion of the connector as in the first pictures?
Thanks in advance to anyone that can help.
Regards.
02-21-2012 09:53 AM
You have an old PXI-5600. Newer revisions (rev and later = E191764E-xx ) have a modified connector that allows them to be inserted into hybrid compatible slots in newer chassis. You can likely send in your old PXI-5600 to NI to have the connector modified to fit into your new chassis. There is a fee for this conversion. This document explains the connector change.
http://zone.ni.com/devzone/cda/tut/p/id/3882
I'd recommend you call NI.