From 11:00 PM CDT Friday, May 10 – 02:30 PM CDT Saturday, May 11 (04:00 AM UTC – 07:30 PM UTC), ni.com will undergo system upgrades that may result in temporary service interruption.
We appreciate your patience as we improve our online experience.
From 11:00 PM CDT Friday, May 10 – 02:30 PM CDT Saturday, May 11 (04:00 AM UTC – 07:30 PM UTC), ni.com will undergo system upgrades that may result in temporary service interruption.
We appreciate your patience as we improve our online experience.
06-03-2014 01:59 PM
In LabView Quickdrop box, I clicked on the Configure... button and it comes up with searching for "\_LaunchHelp.vi" and then after a few seconds it closes. Can someone help me on this?
06-03-2014 02:13 PM
_LaunchHelp.vi is a regular file in the LabVIEW installation that lives in the [LabVIEW 20xx]\help folder. Can you see if it's there? If not, you may need to repair your LabVIEW installation.
If that doesn't help, go to Tools > Options > Paths and make sure "Use default" is selected for all path types. I can't think of a reason why this could cause the problem, but it's worth a try.
06-03-2014 02:54 PM
Yeah I was going to say what Darren said, try to repair LabVIEW or better yet, try re installing it. Other than that I don't have a clue as mine works fine.
06-03-2014 03:12 PM
Hello Darren, I looked and did not see it so I will try a repair or re-install. Thank you!
06-03-2014 04:10 PM
Ok, good luck! Keep us posted.
06-05-2014 07:58 AM
I tried a repair, but that did not fix it. I will try to do a re-install next.
06-12-2014 12:29 PM
Hello Darren, I finally had a chance to do a re-install and now the Configure button is working- Thanks for your help!!
06-12-2014 12:30 PM
Great, I'm glad you got it working. Let me know if you have any other questions as you start using Quick Drop more.