Overview
The example is to demonstrate how to generate three analog signals with user defined delay programmatically
Description:
This VI would shows you how to generate three identical origin of a signal with applied delays by the user. This is achieved by altering the time element of the waveform of the generated waveform made programmatically within the LabVIEW. By altering the time, we could utilize some delays to the signals
Steps to Implement or Execute Code:
To implement this example:
- Define the Physical Channels
- Set the value of the parameters as needed
- Run the VI
- (Optional) Turn on the Highlight Execution to see the flow of the VI
To execute this example:
- Install the required software.
- Connect the DAQ hardware that supports the AO features
- Confirm the connection with the MAX with TestPanel
- Open the VI and refer the Implement Steps
Requirements
Software
LabVIEW 2012 or compatible
NI-DAQmx 9.0 or compatible
Hardware
cDAQ with C series Analog Output Module
**This document has been updated to meet the current required format for the NI Code Exchange.**