To download NI software, including the products shown below, visit ni.com/downloads.
Overview
Sends serial commands to a Digi Xbee Pro RF module.
Description
Use the attached VIs to communicate serially with your Xbee device. The serial command has the format "ATCOMMAND*", where COMMAND can be found in the device's product manual.
Requirements
1. LabVIEW 2012 (or compatible).
2. Digi product that uses the AT command structure.
Steps to Implement or Execute Code
1. To send a command to your Xbee module, use the VIs in this order:
2. Enter-AT-Cmd-Mode.vi to enter AT command mode
3. AT_SetCmd.vi to send the command
4. AT_GetCmd.vi. to receive the information requested
Additional Information or References
Example code from the Example Code Exchange in the NI Community is licensed with the MIT license.
Can you show a wiring sample of these?... I want to send Values from my joystick through my Xbee Pro S2B
This is my post... http://forums.ni.com/t5/LabVIEW/Send-Joystick-Values-through-Xbee-PRO-S2B-USB/td-p/2262742
Thanks in Advance
Yeah can i see the pinout for this?
I don't understand how it works.
If I want to read a digital input D0... is it right if the strings are "3" in Set_ATCmd and
string "D0" in Get_ATCmd???
Set_ATCmd: 3 (set to 3 if it corresponds to a digital input)
Get_ATCmd: D0 (AT Command for PIN0)
Do you have a VI for API mode?