04-12-2024 05:42 AM
HI everybody,
I'm using a NI 9361 to get a velocity signal from several motors and I'm struggling with some glitches n the signal.
I found in the manual the following text:
Programmable Digital Filter
the NI-9361 has a digital filter on each of the digital input lines to filter unwanted glitches on the digital input signal.
My question is how do I enable and configure the filter? I do not find any possibility in NI MAX or Labview.
Karsten
Solved! Go to Solution.
04-12-2024 06:02 AM
Try the method in Enabling Digital Filtering Using Dummy Counter