LabVIEW Interface for Arduino Discussions

After almost 3 years of standstill with LIFA, finally LINX provides continuation!

Thanks for the great support in the past, Sam, and keep it up!

PS: Does this mean that LINX also became available as a standard NI package repository in the VI- PackageManager (JKI VPIM), just like LIFA?

If so, maybe the getting started tutorial should be reworked a bit, since it still refers to an external download:

https://www.labviewhacker.com/doku.php?id=learn:libraries:lvh_toolbox:tutorials:install_lvh_toolbox

I need to know if that is based on multiplo arduino, this board (multiplo)is an atmel processor can program 32U4 Lifa or Linx, because I want to make a data acquisition with this board.

Are you referring to the Duinobot Miltiplo Robot Brain?   See:

<http://multiplo.org/product/duinobot-v1-2-0-2/>

If not please post a link to the board you are referring to.

hrh1818

Hi all!! could someone help me please? euh i would like to activate the AREF Pin on arduino mega. i know that i need to include the following function : "analogReference(INTERNAL2V56)" to set my ref voltage to2.56v. but i can't figure out where in the firmware/ step up file i need to make this change. thanks

Here is a tutorial on adding a custom command to LINX.

Hope this gets you started

With this upgrade would i be able to use more than 6 analog pins of my arduino Mega? If not, how can i make that?

Thanks and greetings from Colombia!

andresvargas92  Although I do have 'mega" board, but I have not used it with Lix yet. I have used LINX with Uno and better yet DIGILENT's  ChipKit32 (with plenty of I/O s. Strongly suggest you give it a try. LINX install better than lifa and and works with much less headache than its predecessor. Many kudos to Sammy_K and I can not wait for the official release of version 1.1. Regards, Barddya

You need to ask your question in the LINX forum.

hrh1818