To download NI software, including the products shown below, visit ni.com/downloads.
Overview
This example uses the NI-SCOPE driver to perform a single configured acquisition off of a single channel.
Description
The acquisition will start on an analog edge and this start will cause a 5 V TTL trigger to be exported on a desired PFI/PXI Trigger/RTSI Line. The NI-SCOPE Export Trigger VI can be found under Measurement I/O»NI-SCOPE»Triggering»niScope Export Trigger.vi.
Requirements
Steps to Implement or Execute Code
Additional Information or References
VI Snippet
**This document has been updated to meet the current required format for the NI Code Exchange.**
Regards,
Dan King
Example code from the Example Code Exchange in the NI Community is licensed with the MIT license.
Thanks a Lot for the Post...