11-19-2014 07:39 AM
Hello,
I am a new user for Labview. I couldnot able to find DAQ Assistant. Please suggest me some ideas to find out the same.
or Do i need to connect my Laptop to the Hardware so that i will get the DAQ Assistant in my software.
Please help me
Thanks
Deepu
Solved! Go to Solution.
11-19-2014 08:00 AM
The DAQ Assistant is not installed with LabVIEW, but with DAQmx. If you have installed drivers for a DAQmx device, this will install the DAQ Assistant in LabVIEW. It is found on the palettes in Measurement I/O>>DAQmx - Data Acquisition.
11-19-2014 08:01 AM
11-30-2014 04:42 PM
Thanks a lot. It worked for me. 🙂 🙂
01-02-2015 02:33 AM
hi
I have the same problem that the daq assisetant button is missing.
The problem detall is similar to the above. When I click on the function palette, the " daq assistant" button does not exist on the category under express>input.
I cannot find it on the measurement I/O category either.
I am running on
win 7 64bits
labVIEW 2012 (Ver 12.0f3)
NI-DAQmx Device Driver 9.8.0f3
I already deal with it by different reinstallation order. Unfortunately, the problem is still not yet resolverd.
Thank you.
01-02-2015 10:54 AM
It is unclear.
Did you install DAQmx AFTER installing LabVIEW?
Did you restart LabVIEW after installing?
Did you reboot your PC after installing?
11-03-2015 04:19 PM
I have just went down this road without success. I still cannot find tthe DAQ Assistant. Anyyone have any other suggestions? I am working on a company machine. We used to have the DAQ Assistant on another machine. I went through this thread and as far as I know all the suggected drivers have been downloaded. However, the DAQ Assistant is still missing......
HELP!!!
11-03-2015 05:42 PM
11-04-2015 06:41 AM
LabView 8.6
DAQmx - 9.4
I also have on hand DAQmx - 9.1, but I installed 9.4.
Please advise.
11-04-2015 07:43 AM
That combination should work according to http://digital.ni.com/public.nsf/allkb/B40B0F539991EFDE86257E4C0080D0C5
But you still need to answer the questiod, Did you install DAQ mx AFTER installing LabVIEW?