02-26-2010 09:19 AM
I want to connect cRIO 9012 with my computer via cross cable and my computer is connected with internet connection via WI-FI and i want to send mail through cRIO in order that cRIO uses my computer internet connection to send mail.
Here i have 2 connections 1. local area network i.e between cRIO and computer and 2)Wireless connection between internet and my computer. Now i want to send mail through cRIO via my computer.
Thanks.
Solved! Go to Solution.
02-26-2010 04:05 PM
That's really more of a Microsoft Windows question rather than a LabVIEW question.
You need to do some googling to figure out how to set up a network where you computer acts as a bridge between the small private network to you cRIO and the wireless network you have going to the internet.
02-26-2010 04:21 PM
This will get you started with setting up the crossover connection:
http://digital.ni.com/public.nsf/allkb/4E13E46226E67642862576A4007BC353
As for turning your desktop into a gateway for the cRIO, I've never tried it but this might work for you:
http://support.microsoft.com/kb/306126
Please let us know how it goes!
03-01-2010 05:02 AM
Hi B O B
Thanks your given link is very helpful for me
Jawad
03-04-2010 10:00 AM
I have one problem connecting cRio to my computer via Cross Cable. I have Windows Vista and probably it will be the problem because one computer of the University works with Windows 2000 and it works well. I connect it but the programm doesn't recognize them. Max is enable to pass the firewall.
Thank you
03-05-2010 05:23 PM
03-09-2010 05:50 AM
Thank you, now CRio appears on the MAX. But I have a new problem.
Now I can't work with it. If I launch LabView Software and try an empty project and select a Real time project on "Targets", I can't find any Real time desktop clicking rigth button on the project <New<Target and devices....
Why?
Thank you
03-09-2010 07:08 AM
Sounds like you need to install NI-RIO. The latest version is 3.4.
http://joule.ni.com/nidu/cds/view/p/id/1607/lang/en
Sebastian
03-09-2010 07:39 AM
I've installed it this morning before I have this problem. I'm tryin to install latest version tomorrow, but I think it won't be the problem
thanks
03-09-2010 09:41 AM
What version of LabVIEW do you have and what version of RIO did you install?
Thanks,
Sebastian