12-19-2010 10:57 PM
in NI9411 - is there any counter logic in encoder signal?
Solved! Go to Solution.
12-20-2010 09:00 AM
Hi there!
The specifications for the 9411 can be found here http://sine.ni.com/nips/cds/view/p/lang/en/nid/208812
This does not contain any counters.
I hope this helps.
12-20-2010 05:22 PM
Yeap!
I read the data sheets earlier, and I couldnt found any counter logic either.
Are you sure about this?
Thank you! 😃
12-21-2010 02:53 AM
If you are using the 9411 with a CDAQ (the old version) then using slots 5 or 6 will allow you to use counters off the chassis. If you are using a CDAQ 2 (the new version), then any slot can be used as a counter. The 9411 itself does not contain any counters.
Please let me know if I can help further.
12-22-2010 12:06 AM
Thanks alot!! 😃
I think You explained me enough 😃