11-09-2010 07:47 AM - edited 11-09-2010 07:49 AM
Has anyone converted the Thermotron drivers for Chamber control to VI's that will run in LabView ver 9 or 10? Specificaly I an attempting to interface with a Thermotron 3800 controller via TCP/IP.
Solved! Go to Solution.
11-09-2010 09:47 AM
I recently posted something that might help you on another thread. I didn't use the Thermotron drivers, rather I used VISA based on their recommendation here (example).
11-10-2010 05:37 AM
Thank you that got me thinking in the right direction. Although I did it it TCP/IP rather that serial.
06-28-2012 07:53 AM
I basically wrote a standalone application that can detects and replicates most of the basic functions on the thermotron touch panel. It is very simple by referring to the thermotron user manual and send the command thru tcp protocol vi library.
Take a look at the details of the complete project and snapshot below: (Vote for me if you think it's cool!)
06-28-2012 01:16 PM
@KelvinTang wrote:
I basically wrote a standalone application that can detects and replicates most of the basic functions on the thermotron touch panel. It is very simple by referring to the thermotron user manual and send the command thru tcp protocol vi library.
Take a look at the details of the complete project and snapshot below: (Vote for me if you think it's cool!)
https://decibel.ni.com/content/docs/DOC-18615
Are you done spamming these forums?
http://forums.ni.com/t5/Instrument-Control-GPIB-Serial/thermotron/m-p/2048534#M54337
http://forums.ni.com/t5/LabVIEW/thermotron/m-p/2048530#M668229
http://forums.ni.com/t5/LabVIEW/Thermotron-TCP-IP-interface/m-p/2048526#M668227
http://forums.ni.com/t5/LabVIEW/Controlling-Thermotron-Basic-steps/m-p/2048524#M668226
06-28-2012 06:53 PM
Apologize for the spam, I do tried with tcp/ip and it works with LV 10. Sharing attached student-level created subVIs for Thermotron 8200.
08-23-2014 09:17 AM
Can anyone please convert Thermotron TCP/IP interface to lab view version 8.2.1.
08-23-2014 09:27 AM
08-23-2014 11:56 AM
Sorry for that and I only recall of conversion on the TCP/IP.
08-23-2014 12:39 PM