08-06-2008 12:57 AM
08-06-2008 01:35 AM
Hi Alagar,
In short: Yes !
First i would recommend to read Manual at chapter 5 under "Sequence Adpater"
Espeacilly take a look at sub folder "Setting up Teststand as a server for Remote Executions"
to configure your maschine in right way.
If this is done remoting should be very easy!
Greetings
Juergen
08-06-2008 04:17 AM
08-06-2008 06:01 AM
08-06-2008 06:37 AM
08-07-2008 03:18 AM
08-07-2008 03:33 AM
Hi,
I tried to write a example. But i was able to install Remote Engine on my buisness maschine -> no Admin rights
I will try on my private maschine this evening -> So just wait a few hours.
To call the sequnce from the remote maschine would create a directory and call it from there.
In my company all TS files we are using are on a servers directory so it must work.
I hope that is what you are descriping as "call". This is not comparable with running a sequence on a computer
Greetings
Juergen
08-11-2008 09:23 AM
Hi,
I have tried to install the remote engine as descripted in chapter 5.
I was logged on a admin on a local maschine -> But no access !!
no admin rights!
Well done i am using TS4.0 But last year i got it running under TS3.5
Question to other members here: What did i wrong ?
Greetings
Juergen
08-12-2008 03:22 AM
09-08-2008 11:17 AM
Hi lordsathish,
Have you seen this article on error code -17851?
TestStand Remote Execution Fails When Using Windows XP Service Pack 2 With Error -17850 or -17851
http://digital.ni.com/public.nsf/allkb/157B530CE191D9348625700E003E9EA8?OpenDocument
Let me know if you are still having issues with remote execution.
Regards,
John B.
Applications Engineering
National Instruments