05-04-2007 11:57 AM
Status: Compilation failed due to a Compile Server error.
Error -61499 occurred at handleDirectoryTransfer.vi:1 when called from connectionHandler0.vi
This error code is undefined. No one has provided a description for this code, or you might have wired a number that is not an error code to the error code input.
Start Time: 5/4/2007 6:47:52 PM
End Time: 5/4/2007 6:47:56 PM
05-04-2007 12:33 PM
Can you run the compile server on a remote machine? You can set this up by folowing the instructions here:
http://zone.ni.com/reference/en-XX/help/371599B-01/lvfpgahelp/compiling_fpga_vi_remotely/
If you can compile on a remote machine, but not locally than perhaps there is a file permission issue or networking issue on your local machine. This is a good first troubleshooting step to determine if the problem is local.
Regards,
Joseph D.
05-07-2007 09:13 AM
01-18-2009 08:02 PM
01-21-2009 09:00 AM
Hi Joe,
Are you also using LabVIEW 8.2? There were some changes to the network code in the compile server in LabVIEW 8.6 and I'm curious if that helped with this issue.
Thanks,
Jonathan
01-21-2009 09:44 AM
I am using LabVIEW 8.6. I should also have the newest version of the FPGA module (and everything else). The compilie server is running on XP SP2, P4. The labview and the FPGA client are running on XP SP2 Core2Duo.
01-21-2009 10:08 AM
01-21-2009 11:10 AM
04-02-2009 07:41 AM
Hi,
I have had the same problem, this is an issue regarding files that are not overwritten during a new compilation. The files can be manualy deleted from the C:\NIFPGA86\srvrTmp\localhost path and then it works again. Offcourse changing the IP address from localhost to something else helps because this generates a new folder!.
With kind regards,
Arnoud de Kuijper
T&M Solutions BV