Has anyone a vi for LCD with COM- port for SBRIO

[ruedi]

Hi folks,

I have a SBRio- board and want to drive a LCD- display over the COM- port.

Is it possible?

Has someone a vi for this.

I know, that this is possible with the FPGA- lines, but isn't the COM- port the normal/better way?

Greetings, Ruedi

[Wire_Warrior · Accepted solution]

If you look on the LabVIEW Tools Network and search for LCD a couple of possibilities appear.  http://www.ni.com/np/app/main/p/bot/no/ap/lvtn/lang/en/pg/1/sn/n25:software,n21:28/sb/default/?q=LCD

The Reach toolkit specifically says it interfaces via RS-232.  While this may not be your specific device it might be worth a look.

Its worth noting that I would have loved to have this a few years back on a project using a Reach touchscreen.

There is also an example here http://www.ni.com/example/31079/en/.

Hopefully these will help.

Wire Warrior