08-10-2015 03:50 PM
Hi,
using labview 2014,
trying to get data automatically in excel or CSV format but not getting the proper code, or insufficient knowledge of labview.
as shown in image below.
08-10-2015 03:55 PM
08-10-2015 03:56 PM - edited 08-10-2015 03:57 PM
You say you tried to use Write to Spreadsheat file. This is the easiest way to do it. Convert your data all to DBLs or all to strings and write it to file that way. If you've tried this already, share that code.
Edit: Dennis, I assume his dynamic data is numeric since he wrote a numeric value in the table under PV.
Cheers
--------, Unofficial Forum Rules and Guidelines ,--------
'--- >The shortest distance between two nodes is a straight wire> ---'
08-10-2015 04:01 PM
08-10-2015 04:14 PM - edited 08-10-2015 04:23 PM
Thanks for the reply.
* I just want that data from chart to be saved, even if the operator forgot to save the data by right click on chart.
* with respect to time on x axix, as attached one CSV file.
* if possible time stamp which can provide the fault occurance tme and date if any on system. (not so important at this stage)
attached vi for reference.
Got error with dynamic data connection.....
Thanks.
08-10-2015 05:02 PM
Tried, but couldnt manage to get.
please suggest.
08-11-2015 10:00 AM
Your two loops are not allowed to run in parallel due to the data dependancy between then. Look at the Producer/Consumer.