set gain in DAQ PCI-MIO-16E-4

[tibu]

Anyone know how to adjust the gain in PGIA  of PCI-MIO-16E-4 board ?

regards

thanks!!!

[Burban]

You set gain by adjusting the Channel Min/Max values or the Range High/Low properties in DAQmx.  A complete description can be found here:

Using Min/Max or High/Low to Set NI-DAQmx Channel Gain

[tibu]

Thank you very much Ben.

Sorry I have another question. I'm trying to combine the gain from the PCI-MIO-16E-4 and the gain of an amplifier SCXI 1102, This is to achieve higher

gain. As you know SCXI only 1 or 100, which adjusts using a DAQmx Channel Property Node. But I don't understand what is the gain value that I get with the DAQ as a function of the  max / min values. I attached the diagram that I used for this

Could you give me some tip or VI example about  this? 

Thank you very much!!!

Regards

Adán

[Oswald_Branford]

Hi Tibu!

Maybe the following links will help you a little more, your DAQ Card is an E Series device:

http://digital.ni.com/public.nsf/allkb/0ED2569AACD12C2586256D82007AE1D5?OpenDocument

http://decibel.ni.com/content/docs/DOC-4034

Hope this helps, ill check your diagram and let you know.

Have a great day!!