05-25-2010 10:35 AM
Anyone know how to adjust the gain in PGIA of PCI-MIO-16E-4 board ?
regards
thanks!!!
05-25-2010 11:15 AM
You set gain by adjusting the Channel Min/Max values or the Range High/Low properties in DAQmx. A complete description can be found here:
Using Min/Max or High/Low to Set NI-DAQmx Channel Gain
05-25-2010 12:45 PM
Thank you very much Ben.
Sorry I have another question. I'm trying to combine the gain from the PCI-MIO-16E-4 and the gain of an amplifier SCXI 1102, This is to achieve higher
gain. As you know SCXI only 1 or 100, which adjusts using a DAQmx Channel Property Node. But I don't understand what is the gain value that I get with the DAQ as a function of the max / min values. I attached the diagram that I used for this
Could you give me some tip or VI example about this?
Thank you very much!!!
Regards
Adán
06-08-2010 11:37 AM
Hi Tibu!
Maybe the following links will help you a little more, your DAQ Card is an E Series device:
http://digital.ni.com/public.nsf/allkb/0ED2569AACD12C2586256D82007AE1D5?OpenDocument
http://decibel.ni.com/content/docs/DOC-4034
Hope this helps, ill check your diagram and let you know.
Have a great day!!