12-15-2008 01:37 PM
Solved! Go to Solution.
12-16-2008 11:15 AM
Hello,
You can make the Reduction Factor an input of the Express VI by converting it to a subVI. You will need to right click on the Sample Compression VI and select Show Front Panel. This will convert the express VI into a standard subVI and you will not have access to the dialog box that you previously used. You can change the "Size" in the block diagram to a control and link it on the connection diagram. This will create another input into this VI. I have provided a link that should show you how to change the connector pane. It is in the LabVIEW help files.
http://zone.ni.com/reference/en-XX/help/371361E-01/lvhowto/selecting_a_connector_pane/
12-16-2008 02:42 PM